Rubber Spray®
Rubber Spray® is a modified elastomeric asphalt emulsion specifically formulated for application with a specially designed spray system. Rubber Spray® is a cold applied, dual component product that yields a membranewith excellent strength, elasticity and adhesion. Rubber Spray® is an environmentally friendly waterproofing product that can be applied indoors and outdoors with conventional protective equipment.*
| SPRAY GRADE | |
|---|---|
| Property | Typical Results |
| Specific gravity (liquid) kg/m3 | Approx. 1.0 |
| Odor | None |
| VOC | Contains no solvents |
| Color | Brown to black |
| % solids (wt) | 53-58 |
| Viscosity, SSF @ 25ºC, seconds | 15-20 |
| pH | 10-12 |
| PERFORMANCE (Cured membrane) | |
|---|---|
| Property | Typical Results |
| Color | Black |
| Specific gravity, kg/m3 | Approximately 1.0 |
| Chemical resistance | Resists most inorganic solutions Not recommended for petroleum products. See Chemical Resistance chart for further details. |
| Biological resistance ASTM E 154, ASTM 0412 | Passed (> 90% original value) |
| Impact resistance CSB 37-GP-56 @ 23ºC, in-lbs | Passed (168) |
| Water tightness after impact | Passed (no leakage) |
| Tensile strength ASTM D412, psi | 90 |
| Elongation, % | 850 |
| Adhesion to concrete strength, ASTM C 907 (amended to tensile adhesion), psi | 111 PSI |
| Puncture resistance CGSB 37-GP-56 24 hr @ 29N, -5ºC | Passed (No perforations) |
| Accelerated weathering, ASTM G 155,D 412 | Passed (No deterioration of film) |
| Tensile strength | Passed (> 90% original value) |
| Hardness, Durometer Type 00 | 85-87 |
| Underwriters Laboratories | Class A Fire Rating (call for details |
| APPLICATION |
|---|
|
Rubber Spray® is a water-based, environmentally safe alternative to conventional hot-applied, solvent based and sheet membrane waterproofing systems. Since Rubber Spray® cures by evaporation, a minimum application temperature of min. 40ºF (4.5ºC) is required. Apply in thin coats. The product cures within 24-48 hours at 70ºF (21ºC) and 50% relative humidity, at a thickness of 40 mils (1mm). For best results, surfaces must be dry and free of dirt, debris, oil or grease. Application is not recommended if rain is imminent, or in high humidity environments. Rubber Spray® is applied between 20-30 ft²/gal (0.3-0.7 m²/ litre) to produce a 40-60 mil (1-3 mm) protective membrane. Rubber Spray® dries to the touch instantly. Curing time will vary depending on temperature and relative humidity. |
| LIMITATIONS |
|---|
|
*Rubber Spray® is mildly alkaline. When applying this product observe appropriate safety precautions, wear gloves, eye protection and other suitable protective equipment. For further information please consult the product MSDS. Rubber Spray® should not be applied when the ambient temperature is below 40ºF (4.5ºC). The uncured membrane may be damaged if frozen. Some surface base coats, such as coal tar are unsuitable for use with Rubber Spray.® |
| CAUTION |
|---|
|
For industrial use only. Keep out of reach of children. Avoid storage below 40ºF (4.5ºC). Please consult the MSDS before using Rubber Spray.® |
Rubber Spray® is formulated to be used in conjunction with PermaDri’s expertly-engineered spray equipment. Using the dual-component sprayer can provide tremendous security given the fact that the coating sets instantly. The equipment allows for simultaneous spraying of Rubber Spray® and a water-based activator that results in an application that is dry to the touch within seconds. Likes all PermaDri coatings, Rubber Spray® is cold-applied and non-toxic (no VOCs), thus reducing the risk of harm or injury to the applicator. Rubber Spray® adheres to virtually any surface including metal, concrete, wood, tile, foam, and more. Rubber Spray® provides a fast and easy solution for all waterproofing and corrosion protection needs
Applications:
Download:
©2012 PermaDri Incorporated | 4595 West Jacquelyn Avenue, Fresno, CA 93722 | 800.279.5604 | Contact Us