Corrosion Protection

PermaDri’s products provide a quick and easy solution for corrosion protection applications including: compactors, storage tanks, chemical resistant liners (link to chemical resistance chart), and any rusted metal surface. Permadri’s coatings prevent corrosion on new surfaces* and stop corrosion on already affected areas. Metal Coat is easily applied using a brush, roller, trowel, or squeegee. The coating adheres easily to all metal surfaces and does not require a primer. The coating is cold-applied and safe for people and the environment since it contains no VOCs.

Using PermaDri Coatings on Metal:

• If the surface is already corroded, power washing is usually all that is required. There may be special circumstances where lightly sanding the surface may be required.
• Flush the surface with water to remove excess debris or residual oils. Allow the surface to dry.
• No primer is needed. Apply PermaDri coating using a brush, roller, squeegee, or trowel.
• Allow the coating 24-48 hours for curing (NOTE: curing time varies depending upon application thickness, temperature, and relative humidity).

*NOTE: It might be necessary to clean new metal with vinegar and flush with water to remove residual oils. Contact us with questions regarding your specific project.

Corrosion Protection Application Products

• Rubber Coat
• Rubber Patch
• Rubber Spray
• Concrete Coat
• Metal Coat

Did You Know?

All PermaDri products are:

• Free of Flammable Solvents
• Non-Toxic, Oderless and Water-based
• Excellent Strength, Elasticity and Adhesion

Become A PermaDri Applicator

Contact us for more information about how to become a PermaDri Applicator and find out when the next PermaDri Applicator School is scheduled.